HP Color Copier 140/150 (English) Color Copier User's Guide Model 140,145,150, - Page 48
Copy streaked, smeared, or with white horizontal lines, Black bar in margins on copy Models 145
View all HP Color Copier 140/150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Copy streaked, smeared, or with white horizontal lines Possible Causes Solutions The Paper Type setting does not match the paper loaded in the paper tray. If you are using special papers, such as photo, premium inkjet, iron-on, or transparencies, you need to make sure the Paper Type setting you selected matches the type of paper you have in the bottom tray. Press the Paper Type button until the paper type on the display matches the type of paper you have loaded in the bottom tray. Then press Select/Resume. You are copying on the wrong side of the paper. Be sure to put the paper print-side down. Photo paper should be placed glossy-side down. Gray arrows on premium papers should be facing up. Blue arrows on transparencies should be facing up. The nozzles in the print cartridge may be clogged. Print a Self Test Page using the procedure on page 2-12. If any of the colored bars are missing (blue, magenta, yellow, or black), the color print cartridge must be replaced. If the page shows streaking or white lines through any of the colored bars, the cartridges need to be cleaned (see the procedure on page 7-3). If copy quality still seems poor after you clean the cartridges, replace them. Black bar in margins on copy (Models 145 and 155 only) Possible Causes Solutions You are copying from a transparency (that is, your original is printed on transparency film), and a black bar is showing up on the copy. Place a blank piece of white paper over the transparency on the copier glass. This will prevent an image of the document feeder rollers from being included on your copy. You are using the Normal, Auto Fit, Clone, or Poster reduce/enlarge option, and a black bar is showing up on the copy. The copier's sizing sensor (on the top of the document feeder lid) is misreading the size of your original. Clean the glass, especially the right back corner, using the procedure on page 7-1. You are copying a Letter-size original onto A4-size paper, and your copy will include an image of the document feeder roll-off at the bottom of the page. If you selected "Normal 100%" change the Copy Paper Size setting to Letter for this copy only. Change the copy Paper Size back when finished. If you selected a Custom zoom percentage less than 100%, place the original on the glass and place white sheets of paper on top of the original to cover the entire glass. 5-10 Troubleshooting