HP Color Copier 140/150 (English) Color Copier User's Guide Model 140,145,150, - Page 46

No copies coming out (Continued) Possible Causes Solutions The HP Color Copier may not be turned on. Turn the HP Color Copier on by pressing the Power button on the front of the product in the bottom right corner. The current Copy Quality setting will light up, and a message will appear on the front panel. The paper has jammed in the copier. Clear the paper jam using the procedure on page 5-1. Copies taking too long Possible Causes You are using the Best copy quality setting. You are using the Transparency or Photo Paper Type setting. You pressed the Color start button for a black and white document. The copier is not warmed up. The copier glass is dirty. You are printing on plain paper, but have selected another Paper Type on the front panel. Solutions The Best setting produces the highest quality copies, but it is the slowest setting. Change the Copy Quality setting to either Normal or Fast. To learn more about copy quality settings, see page 3-4. When you copy onto transparency film and photo paper and use the Transparency or Photo Paper Type setting, the copying process slows down, for second and subsequent copies, to allow the ink to dry. Press Clear/Stop to cancel the first copy job. Then press the Black start button. The scanner bulb shuts off if it remains idle for 12 hours. It must warm up the first time it is used. Dirty copier glass (fingerprints, smudges, etc.) slows down the copying process. Clean the glass using the procedure on page 7-1. Change the Paper Type setting on the front panel to Plain Paper. Paper wrinkled and very wet Possible Causes Solutions The Paper Type front panel Change the Paper Type setting to Plain Paper. setting is set to Photo Paper, and you are using Plain Paper. 5-8 Troubleshooting