HP Color LaserJet Enterprise 5700 User Guide - Page 72

Manually con IPv6 TCP/IP parameters from the control panel, Link speed and duplex settings

Page 72 highlights

4. Open the Manual Settings menu. 5. Touch the IP Address, Subnet Mask, or Default Gateway option. 6. Touch the first field to open a keypad. Enter the correct digits for the field, and then touch the OK button. Repeat the process for each field, and then touch the Save button. Manually configure IPv6 TCP/IP parameters from the control panel Use the control-panel Settings menus to manually set an IPv6 address. 1. From the Home screen on the printer control panel, navigate to the Settings application, and then select the Settings icon. 2. To enable manual configuration, open the following menus: a. Networking b. Ethernet c. TCP/IP d. IPV6 Settings 3. Select Enable, and then select On. 4. Select the Enable Manual Settings option, and then touch the Done button. 5. To configure the address, open the Address menu, and then touch the field to open a keypad. 6. Use the keypad to enter the address, and then touch the OK button. 7. Touch Save. Link speed and duplex settings Use the following steps to make changes to link speed and duplex settings. NOTE: This information applies only to Ethernet networks. It does not apply to wireless networks. The link speed and communication mode of the print server must match the network hub. For most situations, leave the printer in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the printer from communicating with other network devices. To make changes, use the printer control panel. NOTE: The printer setting must match the setting for the network device (a network hub, switch, gateway, router, or computer). NOTE: Making changes to these settings causes the printer to turn off and then on. Make changes only when the printer is idle. 1. From the Home screen on the printer control panel, navigate to the Settings application, and then select the Settings icon. 2. Open the following menus: a. Networking Manually configure IPv6 TCP/IP parameters from the control panel 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181

4.
Open the
Manual Settings
menu.
5.
Touch the
IP Address
,
Subnet Mask
, or
Default Gateway
option.
6.
Touch the first field to open a keypad. Enter the correct digits for the field, and then touch the
OK
button.
Repeat the process for each field, and then touch the
Save
button.
Manually configure IPv6 TCP/IP parameters from the control panel
Use the control-panel
Settings
menus to manually set an IPv6 address.
1.
From the Home screen on the printer control panel, navigate to the
Settings
application, and then
select the
Settings
icon.
2.
To enable manual configuration, open the following menus:
a.
Networking
b.
Ethernet
c.
TCP/IP
d.
IPV6 Settings
3.
Select
Enable
, and then select
On
.
4.
Select the
Enable Manual Settings
option, and then touch the
Done
button.
5.
To configure the address, open the
Address
menu, and then touch the field to open a keypad.
6.
Use the keypad to enter the address, and then touch the
OK
button.
7.
Touch
Save
.
Link speed and duplex settings
Use the following steps to make changes to link speed and duplex settings.
NOTE:
This information applies only to Ethernet networks. It does not apply to wireless networks.
The link speed and communication mode of the print server must match the network hub. For most
situations, leave the printer in automatic mode. Incorrect changes to the link speed and duplex settings
might prevent the printer from communicating with other network devices. To make changes, use the
printer control panel.
NOTE:
The printer setting must match the setting for the network device (a network hub, switch,
gateway, router, or computer).
NOTE:
Making changes to these settings causes the printer to turn off and then on. Make changes
only when the printer is idle.
1.
From the Home screen on the printer control panel, navigate to the
Settings
application, and then
select the
Settings
icon.
2.
Open the following menus:
a.
Networking
Manually configure IPv6 TCP/IP parameters from the control panel
63