HP Cp1700 Service Manual - Page 277
Ensure that all the, printer covers are, closed., A nonrecoverable error - service stall error
View all HP Cp1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
Incorrect hardware / accessories / supplies installation Check the printer setup. Ensure that the following components are loaded correctly: Ink cartridges Printheads Paper Ensure that all the printer covers are closed. Power light of the printer blinks amber and green, alternately Ensure that the tape is removed from printheads. Ensure that the paper is loaded correctly into the tray. Ensure that the paper is not jammed in the printer. Ensure that the printer is selected as the default printer. Ensure that Pause Printing is not selected. Incorrect network Ensure that the printer is installation / configuration properly set up in the network environment. Check IP address. Ensure that correct network protocols are installed. A nonrecoverable error Turn off the printer, wait for has occurred. (e.g. the some time, and turn on the carriage might be stalled) printer again. The latest version of the Turn off the printer and then firmware is absent or the turn it on again. firmware might have been If the problem persists, it might incorrectly flashed be a hardware issue or fault. 5 - 48 hp confidential service and repair