HP Dc5000 Computer Setup (F10) Utility Guide - Page 18

Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Description Security (continued) Master Boot Record Security Allows you to enable or disable Master Boot Record (MBR) Security. When enabled, the BIOS rejects all requests to write to the MBR on the current bootable disk. Each time the computer is powered on or rebooted, the BIOS compares the MBR of the current bootable disk to the previously-saved MBR. If changes are detected, you are given the option of saving the MBR on the current bootable disk, restoring the previously-saved MBR, or disabling MBR Security. You must know the setup password, if one is set. ✎ Disable MBR Security before intentionally changing the formatting or partitioning of the current bootable disk. Several disk utilities (such as FDISK and FORMAT) attempt to update the MBR. If MBR Security is enabled and disk accesses are being serviced by the BIOS, write requests to the MBR are rejected, causing the utilities to report errors. If MBR Security is enabled and disk accesses are being serviced by the operating system, any MBR change will be detected by the BIOS during the next reboot, and an MBR Security warning message will be displayed. Save Master Boot Record Saves a backup copy of the Master Boot Record of the current bootable disk. ✎ Only appears if MBR Security is enabled. ✎ Support for specific Computer Setup options may vary depending on the hardware configuration. 14 www.hp.com Computer Setup (F10) Utility Guide