HP Dc5000 Computer Setup (F10) Utility Guide - Page 25

Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Description Advanced* (continued) *For advanced users only. Device Options (continued) Allows you to set: • ACPI S3 support (enable/disable). S3 is an ACPI (advanced configuration and power interface) sleep state that some add-in hardware options may not support. ✎ ACPI S3 selections are supported on select models only. If the ACPI S3 support option is not presented, the other ACPI S3 options (ACPI S3 Video REPOST, ACPI S3 Hard Disk Reset, and ACPI S3 PS2 Mouse Wakeup) will not be available. • ACPI S3 Video REPOST (enable/disable). This feature reruns the video option ROM on a boot from the S3 state (available on select models only). • ACPI S3 Hard Disk Reset (enable/disable). Resets the hard disk after waking from the S3 sleep state. • ACPI S3 PS2 Mouse Wakeup (enable/disable). Allows the mouse to wake the system from the S3 sleep state (available on select models only). • Unique Sleep State Blink Patterns. Allows you to choose an LED blink pattern that uniquely identifies each sleep state. • Frame Buffer Size (options vary depending on platform). Allows you to specify amount of system memory dedicated to the embedded graphics frame buffer. The AUTO setting attempts to optimize the frame buffer size depending on the amount of total system memory. ✎ Support for specific Computer Setup options may vary depending on the hardware configuration. Computer Setup (F10) Utility Guide www.hp.com 21