HP Dc5000 Computer Setup (F10) Utility Guide - Page 22
Windows Operating Systems to run - ram
UPC - 829160313740
View all HP Dc5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Description Advanced* (continued) *For advanced users only. Power-On Options (continued) Allows you to set: • I/O APIC Mode (enable/disable). Enabling this feature will allow Microsoft Windows Operating Systems to run optimally. This feature must be disabled for certain non-Microsoft Operating Systems to work properly. • ACPI/USB Buffers @ Top of Memory (enable/disable). Enabling this feature places USB memory buffers at the top of memory. The advantage is that some amount of memory below 1 MB is freed up for use by option ROMs. The disadvantage is that a popular memory manager, HIMEM.SYS, does not work properly when USB buffers are at top of memory AND the system has 64 MB or less of RAM. • Hot-Pluggable MultiBay Floppy (enable/disable). Enabling this feature allows you to hot-plug a MultiBay floppy into a system running Windows 2000 or Windows XP. (This feature is supported on select models only.) BIOS Wakeup Allows you to set the computer to turn on automatically at a time you specify. (This feature is supported on select models only.) Onboard Devices Allows you to set resources for or disable onboard system devices (diskette controller, serial port, or parallel port). ✎ Support for specific Computer Setup options may vary depending on the hardware configuration. 18 www.hp.com Computer Setup (F10) Utility Guide