HP DreamColor Z27x User Guide 1 - Page 16
Connecting the Cables
View all HP DreamColor Z27x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Connecting the Cables 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Before connecting the cables, route the cables through the cable routing hole in the center of the stand. 3. Depending on your configuration, connect either the DisplayPort or HDMI video cable between the PC and the monitor. NOTE: The video mode is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected through the OnScreen Display (OSD) feature by pressing one of the five front bezel buttons to activate the buttons, and then press the bottom Open Menu button to open the OSD. In the OSD select Video Input and choose the desired input source. ● For DisplayPort digital operation, connect the DisplayPort signal cable to the DisplayPort connector on the rear of the monitor and the other end to the DisplayPort connector on the computer (cable provided). NOTE: There are two DisplayPort connectors on the rear of the monitor allowing you to connect two workstations to the monitor. 8 Chapter 3 Setting Up the Monitor