HP DreamColor Z27x User Guide 1 - Page 27
Mounting the Monitor, Mounting the Monitor Using the Quick Release 2 Mounting Bracket
View all HP DreamColor Z27x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Mounting the Monitor The monitor panel can be attached to a wall, swing arm, or other mounting fixture. You can attach the monitor panel to a mounting fixture using the HP Quick Release 2 mounting bracket or you can attach the monitor panel to a mounting fixture without the HP Quick Release 2 mounting bracket. NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket. CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are required. Longer screws must not be used because they may damage the monitor. It is important to verify that the manufacturer's mounting solution is compliant with the VESA standard and is rated to support the weight of the monitor display panel. For best performance, it is important to use the power and video cables provided with the monitor. Mounting the Monitor Using the Quick Release 2 Mounting Bracket To mount the monitor panel to a mounting fixture using the Quick Release 2 mounting bracket: 1. Remove the four screws holding the mounting plate to the head of the stand. Mounting the Monitor 19