HP DreamColor Z27x User Guide 1 - Page 49
Adjusting the Bezel Button LEDs, Using Auto-Sleep Mode
View all HP DreamColor Z27x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
the function button label display and simply press the desired bezel button to execute the desired command. This will only disable the function button label display for the function button commands. Once you have opened the OSD the function labels will display. To change the bezel function button mode: 1. Press one of the five front bezel buttons to display the button labels and then press the bottom Open Menu button to open the OSD. (If you have already switched this mode press on the bottom bezel function button to open the OSD.) 2. In the OSD, select Menu and Message Control > Function Button Mode and select one of the following functions. a. Select Open Button Label First to display the button labels when you press a bezel button. b. Select Execute Command on First Press to instantly execute the assigned command when you press a bezel button. Adjusting the Bezel Button LEDs The bezel button LEDs have an automatic fade-out feature that is active by default. The LEDs will fade after the OSD timeout period. You can change the LED behavior so that they do not fade out and you can also adjust the brightness of the LEDs if the fade-out feature is disabled. To disable the bezel button fade-out feature: 1. Press one of the five front bezel buttons to activate the buttons, and then press the bottom Open Menu button to open the OSD. 2. In the OSD, select Menu and Message Control > Bezel Button Auto-Fade > Disable (Always On). If the bezel button fade-out feature has been disabled (as described above), you can adjust the brightness of the buttons on the front bezel to different levels of ambient lighting. To change the bezel button brightness: 1. Press one of the five front bezel buttons to activate the buttons, and then press the bottom Open Menu button to open the OSD. 2. In the OSD, select Menu and Message Control > Bezel Button Brightness and use the adjustment scale to set the buttons to the desired brightness. You can also change the color of the button LEDs on the front bezel. You can make the button LEDs white or red, or set them to automatically change from white to red when ambient lighting is reduced. Red should be used when operating the monitor in low-light environments. The white LED color can negatively impact your eye's color sensitivity while red will not. To change the bezel button color: 1. Press one of the five front bezel buttons to activate the buttons, and then press the bottom Open Menu button to open the OSD. 2. In the OSD, select Menu and Message Control > Bezel Button color and select either Always White, Always Red, or Switch to Red at 70 cd/m 2. Using Auto-Sleep Mode The display supports an OSD (On-Screen Display) option called Auto-Sleep Mode, that allows you to enable or disable a reduced power state for the display. When Auto-Sleep Mode is enabled (enabled Adjusting the Bezel Button LEDs 41