HP DreamColor Z27x User Guide 1 - Page 38
Selecting a Color Space Preset, Adjusting Luminance
View all HP DreamColor Z27x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Selecting a Color Space Preset The Z27x provides factory calibrated color space presets, suitable for a wide variety of color-critical workflows including visual effects, animation, on-set/dailies viewing, professional photography, product design, print/pre-press, graphic arts, and many others. Five industry standard color spaces are provided along with two different ways to access the display's native color gamut. The following table provides information on the five provided standard color spaces. Preset Name sRGB sRGB D50 AdobeRGB BT.709 BT.2020 DCI P3 Red Primary (u'v') 0.451, 0.523 0.451, 0.523 0.451, 0.523 0.451, 0.523 0.557, 0.516 0.496, 0.526 Green Primary (u'v') Blue Primary (u'v') 0.125, 0.563 0.175, 0.158 0.125, 0.563 0.175, 0.158 0.076, 0.576 0.175, 0.158 0.125, 0.563 0.175, 0.158 0.056, 0.587 0.159, 0.126 0.099, 0.578 0.175, 0.158 White Point D65 D50 D65 D65 D65 P3 Gamma sRGB sRGB 2.2 2.4 2.4 2.6 Luminance 250 cd/m2 250 cd/m^2 250 cd/m2 100 cd/m2 100 cd/m2 48 cd/m2 In addition, the Native preset provides access to the display's native color gamut. This preset has also been calibrated to have a D65 white point and a 2.2 gamma. To select a color space preset: 1. Press any button on the front bezel. 2. Press the bottom Open Menu button to open the OSD. 3. Select Color Space to display the color space configuration screen. 4. Use the Up/Down buttons to navigate to the desired color space then press the Select button to activate it. Adjusting Luminance Though each preset is calibrated to a specific luminance level, the luminance can be adjusted postcalibration. The luminance range for all calibrated color space presets can be adjusted from 48-250 cd/m2. The Native preset can be adjusted from 0-100% of maximum display luminance. NOTE: Due to the way LEDs respond to voltage, the further you adjust luminance away from the calibrated value, the less-accurate the luminance value reported by the OSD will be. HP recommends that you calibrate your monitor to the desired working luminance. To adjust luminance: 1. Press any button on the front bezel. 2. Press the bottom Open Menu button to open the OSD. 3. Select Color Space to display the color space configuration screen. 4. Use the Up/Down buttons to navigate to the Adjust Luminance option then press the Select button to activate it. 5. Use the Increase/Decrease buttons to adjust the luminance to the desired level. 30 Chapter 4 Operating the Monitor