HP EliteBook 720 Maintenance and Service Guide - Page 54
WWAN module, Remove the Phillips PM2.0×2.5 screw
View all HP EliteBook 720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
WWAN module Description HP hs3110 HSPA+ Mobile Broadband Module HP lt4112 LTE/HPSA+ Mobile Broadband Module HP lt4111 LTE/EV-DO/HSPA+ Mobile Broadband Module Spare part number 822828-001 790198-001 793116-001 Before removing the WWAN module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the service cover (see Service cover on page 37). 5. Remove the battery (see Battery on page 39). Remove the WWAN module: 1. Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module. NOTE: The WWAN antenna cable labeled "5" connects to the WWAN module "Main" terminal labeled "5". The WWAN antenna cable labeled "6" connects to the WWAN module "Aux/GPS" terminal labeled "6". 2. Remove the Phillips PM2.0×2.5 screw (2) that secures the WWAN module to the system board. (The WWAN module tilts up.) 3. Remove the WWAN module (3) by pulling the module away from the slot at an angle. NOTE: If the WWAN antenna cables are not connected to the terminals on the WWAN module, protective sleeves should be installed on the antenna connectors, as shown in the following illustration. 44 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts