HP EliteBook 720 Maintenance and Service Guide - Page 79
NFC module, Remove the NFC module
View all HP EliteBook 720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Reverse this procedure to install the TouchPad. NFC module Description NFC module Spare part number 781862-001 Before removing the NFC module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the service cover (see Service cover on page 37), and then remove the following components: a. Battery (see Battery on page 39) b. Hard drive (see Hard drive/solid-state drive on page 41) c. Keyboard (see Keyboard on page 50) d. Top cover (see Top cover on page 57) Remove the NFC module: 1. Turn the top cover upside down with the front toward you. 2. Disconnect the bottom cable (1) and top cable (2) from the NFC module. 3. Remove the NFC module (3). Reverse this procedure to install the NFC module. Component replacement procedures 69