HP EliteBook 720 Maintenance and Service Guide - Page 78
TouchPad, to which the TouchPad cable is attached, and then disconnect
View all HP EliteBook 720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
TouchPad Description TouchPad for use in models without NFC (includes cable) TouchPad or use in models with NFC; includes NFC antenna and TouchPad cable Spare part number 781859-001 781860-001 Before removing the TouchPad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the service cover (see Service cover on page 37), and then remove the following components: a. Battery (see Battery on page 39) b. Hard drive (see Hard drive/solid-state drive on page 41) c. Keyboard (see Keyboard on page 50) d. Top cover (see Top cover on page 57) Remove the TouchPad: 1. Turn the top cover upside down with the front toward you. 2. Release the ZIF connector (1) to which the TouchPad cable is attached, and then disconnect the TouchPad cable from the card reader board. 3. Remove the two Philllips PM2.0×3.25 screws (2) that secure the TouchPad to the top cover. 4. Remove the TouchPad and cable (3). 68 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts