HP EliteBook 720 Maintenance and Service Guide - Page 67
Top cover, Close the computer.
View all HP EliteBook 720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Top cover Description Top cover Spare part number 783215-001 Before removing the top cover, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the service cover (see Service cover on page 37), and then remove the following components: a. Battery (see Battery on page 39) b. Hard drive (see Hard drive/solid-state drive on page 41) c. Keyboard (see Keyboard on page 50) NOTE: When replacing the top cover, be sure that the following components are removed from the defective top cover and installed on the replacement top cover: Remove the top cover: 1. Close the computer. 2. Turn the computer upside down with the front toward you. 3. Remove the Phillips PM2.0×3.25 screw (1) that secures the display panel cable bracket and display panel cable to the system board. 4. Remove the display panel cable bracket (2). Component replacement procedures 57