HP EliteBook 720 Maintenance and Service Guide - Page 89
Fingerprint reader board, Detach
View all HP EliteBook 720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Fingerprint reader board Description Fingerprint reader board (includes bracket and cable) Spare part number 730554-001 Before removing the fingerprint reader board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the service cover (see Service cover on page 37), and then remove the following components: a. Battery (see Battery on page 39) b. Hard drive (see Hard drive/solid-state drive on page 41) c. Keyboard (see Keyboard on page 50) d. Top cover (see Top cover on page 57) Remove the fingerprint reader board: 1. Turn the top cover upside down with the front toward you. 2. Detach the fingerprint reader board cable (1) from the top cover. (The fingerprint reader board cable is attached to the top cover with double-sided adhesive.) 3. Remove the three Phillips PM2.0×2.5 screws (2) that secure the fingerprint reader board and bracket to the top cover. 4. Remove the fingerprint reader board bracket (3). Component replacement procedures 79