HP EliteBook Folio 9480m Maintenance and Service Guide - Page 69
Power connector, Keyboard see
View all HP EliteBook Folio 9480m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Power connector Description Power connector Spare part number 702875-001 Before removing the power connector, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29), and then remove the following components: a. Hard drive cover (see Hard drive cover on page 32) b. Hard drive (see Hard drive/SSD drive on page 33) c. Service cover (see Service cover on page 38) d. Keyboard (see Keyboard on page 45) e. Base enclosure (see Base enclosure on page 53) Remove the power connector: 1. Position the base enclosure with the front toward you. 2. Disconnect the power connector cable from the system board (1). 3. Lift the power connector from the computer (2). 4. Remove the power connector. Reverse this procedure to install the power connector. Component replacement procedures 57