HP EliteBook Folio 9480m Maintenance and Service Guide - Page 78
Fingerprint reader board, Remove
View all HP EliteBook Folio 9480m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Fingerprint reader board Description Fingerprint reader board (includes cable) Spare part number 702845-001 Before removing the fingerprint reader board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29), and then remove the following components: a. Hard drive cover (see Hard drive cover on page 32) b. Hard drive (see Hard drive/SSD drive on page 33) c. Service cover (see Service cover on page 38) d. Keyboard (see Keyboard on page 45) e. Base enclosure (see Base enclosure on page 53) f. Fan (see Fan on page 58) g. System board (see System board on page 59) Remove the fingerprint reader board: 1. Position the system board upside down. 2. Disconnect the fingerprint reader board cable from the system board connector, and then remove the assembly. 3. Remove the fingerprint reader board and cable. Reverse this procedure to install the fingerprint reader board. 66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts