HP Evo Notebook PC n110 Compaq Armada 110 and Compaq Evo N110 Maintenance and - Page 94

Removing the Top Cover, Remove the two M2.5 × 4.5 screws securing the top cover

Get HP Evo Notebook PC n110 PDF manuals and user guides View all HP Evo Notebook PC n110 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

Removal and Replacement Procedures 4. Turn the computer top side up with the front facing you. 5. Disconnect the diskette drive cable from the low insertion force (LIF) connector on the system board 1 (Figure 5-16). 6. Disconnect the TouchPad cable from the LIF connector on the system board 2. 7. Remove the two M2.5 × 4.5 screws securing the top cover to the base enclosure 3. 8. Lift the top cover straight up to remove it from the base enclosure 4. Figure 5-16: Removing the Top Cover Reverse the above procedure to install the top cover. 5-26 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
5–26
Maintenance and Service Guide
Removal and Replacement Procedures
4. Turn the computer top side up with the front facing you.
5. Disconnect the diskette drive cable from the low insertion
force (LIF) connector on the system board
1
(Figure 5-16).
6. Disconnect the TouchPad cable from the LIF connector on
the system board
2
.
7. Remove the two M2.5 × 4.5 screws securing the top cover to
the base enclosure
3
.
8. Lift the top cover straight up to remove it from the base
enclosure
4
.
Figure 5–16: Removing the Top Cover
Reverse the above procedure to install the top cover.