HP J9087A User Manual - Page 37
Wall mounting the Series 2600 Non-PWR Switches
View all HP J9087A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Installing the Switch Installation Procedures Wall mounting the Series 2600 Non-PWR Switches 1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting brackets to opposite corners of the switch with the included 8-mm M4 screws. 2. Attach the switch to the wall or wood surface with two 5/8-inch (15.875 mm) number 12 wood screws (not included). For "Flat" Wall Mounting (Vertical) M4 screws Wall 5/8-inch wood screws Installing the Switch WARNING The brackets are attached on opposite corners to improve the stability of the switch on the wall. The Switch 2626-PWR or 2650-PWR Switches are not wall mountable. 2-17
2-17
Installing the Switch
Installation Procedures
Installing the Switch
Wall mounting the Series 2600 Non-PWR Switches
1.
Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to opposite corners of the switch with the included 8-mm M4
screws.
2.
Attach the switch to the wall or wood surface with two 5/8-inch (15.875
mm) number 12 wood screws (not included).
WARNING
The Switch 2626-PWR or 2650-PWR Switches are not wall mountable.
For “Flat” Wall Mounting (Vertical)
M4 screws
The brackets are attached on
opposite corners to improve the
stability of the switch on the wall.
5/8-inch
wood screws
Wall