HP J9087A User Manual - Page 51
Direct Console Access, Installing the Switch, ProCurve Switch
View all HP J9087A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Installing the Switch Installing the Switch Installation Procedures Direct Console Access To connect a console to the switch, follow these steps: Console 1. Connect the PC or Console port terminal to the switch's Console Port using the console cable included with the switch. (If your PC or terminal has a 25-pin serial connector, first Console cable supplied with the switch attach a 9-pin to 25-pin straight-through adapter at one end of the console cable.) 2. Turn on the terminal or PC running a terminal emulator program, or a VT-100 terminal PC's power and, if using a PC, start the PC terminal program. 3. Press [Enter] two or three times and you will see the copyright page and the message "Press any key to continue". Press a key, and you will then see the switch console command (CLI) prompt, for example: ProCurve Switch # If you want to continue with console management of the switch at this time, see chapter 3, "Getting Started With Switch Configuration" for some basic configuration steps. For more detailed information, refer to the Management and Configuration Guide, which is on the Documentation CD-ROM that came with your switch. 2-31