HP Jet Fusion 300 User Guide - Page 29
Power on and off, Turn the printer on and off, Turn on the printer for the first time
View all HP Jet Fusion 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4 Power on and off NOTICE: Operate the printer only within the specified ranges of operating temperature and humidity (see the site preparation guide). If the printer or supplies are exposed to conditions outside the environmental operating range, wait at least 12 hours for everything to reach environmental operating conditions before turning on the printer or using the supplies. Turn the printer on and off Turn on the printer for the first time 1. Ensure that the printer's doors are all closed. 2. Turn the main switch at the rear of the printer to the on position. 3. Wait for the front panel to tell you that the printer is waiting for rearm. 4. Perform a visual check of the printer. Power on and off 23
Power on and off
4
NOTICE:
Operate the printer only within the specified ranges of operating temperature and humidity (see the
site preparation guide). If the printer or supplies are exposed to conditions outside the environmental operating
range, wait at least 12 hours for everything to reach environmental operating conditions before turning on the
printer or using the supplies.
Turn the printer on and off
Turn on the printer for the first time
1.
Ensure that the printer’s doors are all closed.
2.
Turn the main switch at the rear of the printer to the on position.
3.
Wait for the front panel to tell you that the printer is waiting for rearm.
4.
Perform a visual check of the printer.
Power on and off
23