HP Jet Fusion 300 User Guide - Page 95
Printhead alignment issues, Maintenance, Printheads, Align, Part troubleshooting
View all HP Jet Fusion 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
1. You can run a printhead alignment from Maintenance > Printheads > Align. 2. If you are troubleshooting 2D print quality while doing a printhead alignment, do not use the first printed Diagnostic Page from the Alignment flow: always use the second Diagnostic Page printed. The first Diagnostic Page is for reference before alignment only. 3. Print another Diagnostic Page after performing any of the recommended actions and use the two test pages to compare before and after results. Printhead alignment issues ● Alignment issues. If you notice alignment issues, you can print the quality diagnostic plot under Maintenance menu > Part troubleshooting > Print quality diagnostic to check the status of the printhead alignment. See Align the printheads on page 147. ● The front panel may display a system error while aligning the printheads. See System errors on page 161. Printhead alignment issues 89