HP Jet Fusion 300 User Guide - Page 41
Minimum spacing and clearance, Here is a cross- of said part
View all HP Jet Fusion 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
● Minimum spacing and clearance between parts printed as assemblies. Assembly parts that are printed together should have a minimum clearance of 0.7 mm. Parts with thick walls or large surface areas where the assembled features will fit together should have a larger gap to ensure sufficient material escape paths. Consider this example using the HP Keychain part: Here is a cross-section of said part: Minimum specification for parts 35
●
Minimum spacing and clearance
between parts printed as assemblies. Assembly parts that are printed
together should have a minimum clearance of 0.7 mm. Parts with thick walls or large surface areas where
the assembled features will fit together should have a larger gap to ensure sufficient material escape paths.
Consider this example using the HP Keychain part:
Here is a cross-section of said part:
Minimum specification for parts
35