HP LaserJet 9000 HP LaserJet 9000 series printer User Guide - Page 192

Appendix B Control panel menus 192 Item IPX/SPX APPLETALK DLC/LLC Options ENABLE FRAME TYPE SOURCE ROUTING ENABLE ENABLE Values Explanation ON Selects whether the IPX/SPX protocol stack is enabled (ON) or OFF disabled (OFF). AUTO EN_8023 EN_II EN_8022 EN_SNAP TR_8022 TR_SNAP Selects the frame type setting for your network AUTO (default) automatically sets and limits the frame type to the first one detected. For an Ethernet network only, frame type selections include EN_8023, EN_II, EN_8022, and EN_SNAP. For a Token Ring network only, frame type selections include TR_8022 and TR_SNAP. AUTO OFF ALL ROUTES SINGLE ROUTE For a Token Ring network only, specify the NetWare Token Ring Source Routing parameter. AUTO (default): The type of source routing required on the network is automatically sensed. OFF: All packets are sent without source routing, and only packets from the same ring are received. ALL ROUTES and SINGLE ROUTES: All packets are sent with source routing (broadcasts and when the route is unknown). ON For an Ethernet network only, selects whether the AppleTalk OFF protocol is enabled (ON) or disabled (OFF). ON Selects whether the DLC/LLC protocol stack is enabled (ON) or OFF disabled (OFF). Configure device menu