HP LaserJet Enterprise MFP M634 User Guide - Page 112

Enable SMTP SSL Protocol, Enable Scan to Email

Page 112 highlights

5. Click Apply. 6. Click the Scan/Digital Send tab. 7. On the left navigation pane, click Email Setup. 8. On the Email Setup page, select the Enable Scan to Email check box. If this check box is not available, the feature is unavailable at the printer control panel. 9. In the Outgoing Email Servers (SMTP) area, click Add to start the SMTP wizard. 10. In the I know my SMTP server address or host name field, type smtp.onoffice.com, and then click Next. 11. On the Set the basic information necessary to connect to the server dialog, in the Port Number field, type 587. NOTE: Some servers have problems sending or receiving emails that are larger than 5 megabytes (MB). These problems can be prevented by entering a number in Split emails if larger than (MB). 12. Select the Enable SMTP SSL Protocol check box, and then click Next. 13. On the Server Authentication Requirements dialog, complete the following information: a. Select Server requires authentication. b. From the drop-down list, select Always use these credentials c. In the Username field, type the Office 365 Outlook email address. d. In the Password field, type the Office 365 Outlook account password, and then click Next. 14. On the Server Usage dialog, choose the printer functions that will send email through this SMTP server, and then click the Next button. ENWW Set up Scan to Email 99

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255

5.
Click
Apply
.
6.
Click the
Scan/Digital Send
tab.
7.
On the left navigation pane, click
Email Setup
.
8.
On the
Email Setup
page, select the
Enable Scan to Email
check box. If this check box is not available, the
feature is unavailable at the printer control panel.
9.
In the
Outgoing Email Servers (SMTP)
area, click
Add
to start the SMTP wizard.
10.
In the
I know my SMTP server address or host name
field, type
smtp.onoffice.com
, and then click
Next
.
11.
On the
Set the basic information necessary to connect to the server
dialog, in the
Port Number
field, type
587
.
NOTE:
Some servers have problems sending or receiving emails that are larger than 5 megabytes (MB).
These problems can be prevented by entering a number in
Split emails if larger than (MB).
12.
Select the
Enable SMTP SSL Protocol
check box, and then click
Next
.
13.
On the
Server Authentication Requirements
dialog, complete the following information:
a.
Select
Server requires authentication
.
b.
From the drop-down list, select
Always use these credentials
c.
In the
Username
field, type the Office 365 Outlook email address.
d.
In the
Password
field, type the Office 365 Outlook account password, and then click
Next
.
14.
On the
Server Usage
dialog, choose the printer functions that will send email through this SMTP server, and
then click the
Next
button.
ENWW
Set up Scan to Email
99