HP Model 712/100 hp 9000 series 700 model 712 service handbook (a2615-90039) - Page 69
Dealing with a Boot Failure
View all HP Model 712/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Dealing with a Boot Failure If the usual boot device (typically a disk) is not responding as it should, you must attempt to boot from the disk (or another boot device) by selecting it manually. To boot a device manually, follow these steps: 1. Turn off the power to your workstation for a few seconds. 2. Turn the power back on. The monitor displays the following screen: BootRom Version xxx.x Memory Size: xx MB (c) Copyright 1990-1993, Hewlett-Packard Company. All rights reserved Press to stop boot sequence. Press and hold the Esc button as soon as the screen appears. 3. Release Esc when the screen displays the boot administration command menu followed by the BOOT_ADMIN> prompt. 4. List devices that contain bootable media by typing the following at the BOOT_ADMIN> prompt: BOOT_ADMIN> search Enter This causes your workstation to search exhaustively for bootable media. 4-10 Troubleshooting