HP Model 712/100 hp 9000 series 700 model 712 service handbook (a2615-90039) - Page 70
device, Using HP-UX
View all HP Model 712/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
5. Boot from one of the listed devices by typing the following command line at the BOOT_ADMIN> prompt: BOOT_ADMIN> boot device Enter where device is the hardware path to the device, specified in Mnemonic Style Notation, such as scsi.5.0 6. If your workstation still fails to boot, there is either something wrong with the file system or with the hardware. If you suspect a file system failure, see the manual Using HP-UX for help on dealing with file system failures. If you think that something is wrong with the hardware, contact your designated service representative. Troubleshooting 4-11
Troubleshooting
4–11
5.
Boot from one of the listed devices by typing the following command line at
the
BOOT_ADMIN>
prompt:
BOOT_ADMIN>
boot
device
Enter
where
device
is the
hardware path
to the device, specified in Mnemonic Style
Notation, such as
scsi.5.0
6.
If your workstation still fails to boot, there is either something wrong with the
file system or with the hardware. If you suspect a file system failure, see the
manual
Using HP–UX
for help on dealing with file system failures. If you
think that something is wrong with the hardware, contact your designated ser-
vice representative.