HP Nc8430 Pointing Devices and Keyboard - Page 13

Keyboard Switch image (fn+f4) Press fn+f4 to switch the screen image among display devices connected to the system. For example, if a monitor is connected to the computer, each time you press fn+f4, the image switches among the computer display, the monitor display, and a simultaneous display on both the computer and the monitor. Most external monitors receive video information from the computer using the external VGA video standard. The fn+f4 hotkey can also alternate images among other devices receiving video information from the computer, such as S-Video. The following video transmission types, with examples of devices that use them, are supported by the fn+f4 hotkey: ■ LCD (computer display) ■ External VGA (most external monitors) ■ S-Video (televisions, camcorders, VCRs, and video capture cards with S-Video-in jacks) ■ Composite video (televisions, camcorders, VCRs, and video capture cards with composite-video-in jacks) ✎ Composite video devices can be connected to the system only by using an optional docking device. View battery pack charge information (fn+f8) Press fn+f8 to display charge information for all installed battery packs. The display indicates which battery packs are charging and reports the amount of charge remaining in each battery pack. Battery pack locations are indicated by number: ■ Location 1 is the primary battery pack. ■ Location 2 is the optional accessory battery pack. Pointing Devices and Keyboard 2-5