HP Nx6325 HP Compaq nx6315, nx6325 Notebook PC - Maintenance and Service Guide - Page 125
Remove the two Torx8 T8M2.5×9.0 screws, that secure
UPC - 882780649330
View all HP Nx6325 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Removal and Replacement Procedures 6. Turn the computer display-side up with the front toward you. 7. Open the computer as far as possible. Ä CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 8. Disconnect the display cable 1 from the system board. 9. Remove the wireless antenna cables 2 from the clips in the top cover. 10. Remove the two Torx8 T8M2.5×9.0 screws 3 that secure the display assembly to the computer. 11. Lift the display assembly 4 straight up and remove it. Removing the Display Assembly Reverse the above procedure to reassemble and install the display assembly Maintenance and Service Guide 5-35