HP Pavilion 11-n038ca HP Pavilion 11 x360 PC Maintenance and Service Guide - Page 39

USB/audio board, Remove the Phillips PM2.0×3.0 screw

Get HP Pavilion 11-n038ca PDF manuals and user guides View all HP Pavilion 11-n038ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

USB/audio board Description USB/audio board (includes cable) Spare part number 755734-001 Before removing the USB/audio board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). To remove the USB/audio board: 1. Position the bottom cover upside-down. 2. Remove the Phillips PM2.0×3.0 screw (1). 3. Lift up on the rear of the board and lift the board off the bottom cover (2). Reverse this procedure to install the USB/audio board. Component replacement procedures 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
USB/audio board
Description
Spare part number
USB/audio board (includes cable)
755734-001
Before removing the USB/audio board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
28
).
To remove the USB/audio board:
1.
Position the bottom cover upside-down.
2.
Remove the Phillips PM2.0×3.0 screw
(1)
.
3.
Lift up on the rear of the board and lift the board off the bottom cover
(2)
.
Reverse this procedure to install the USB/audio board.
Component replacement procedures
31