HP Pavilion 11-n038ca HP Pavilion 11 x360 PC Maintenance and Service Guide - Page 61
Display assembly, To remove the display assembly
View all HP Pavilion 11-n038ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Display assembly Description Display assembly (11.6-in [29.5-cm] HD, anti-glare, touchscreen, for use in red models without WWAN Display assembly, 11.6-in [29.5-cm] HD, anti-glare, touchscreen, for use in red models with WWAN Webcam Display cable Display enclosure for use in silver models Display enclosure for use in red models Hinge covers for use in red models Hinge covers for use in silver models Spare part number 755730-001 756108-001 758848-001 761350-001 758845-001 758846-001 758847-001 759503-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Remove the battery (see Battery on page 49). To remove the display assembly: 1. Release the wireless antenna cables from the clips (1) built into the base enclosure. NOTE: The number of antenna cables may vary. 2. Disconnect the webcam cable (2) from the system board. Component replacement procedures 53