HP Pavilion 11-n038ca HP Pavilion 11 x360 PC Maintenance and Service Guide - Page 59

TouchPad button board, bracket up and lift it off the computer

Get HP Pavilion 11-n038ca PDF manuals and user guides View all HP Pavilion 11-n038ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

TouchPad button board Description TouchPad button board (includes bracket and cable) Spare part number not spared Before removing the TouchPad button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Remove the battery (see Battery on page 49). Remove the TouchPad button board: 1. Disconnect the TouchPad board cable from the system board (1). 2. Remove the two Phillips PM2.0×3.0 screws (2) that secure the bracket, and then rotate the front of the bracket up and lift it off the computer (4). 3. Remove the three Phillips PM2.0×2.0 broadhead screws (5) that secure the TouchPad button board to the computer. 4. Lift the foil and rubber gaskets from atop the left and right broadhead screw holes (1). Component replacement procedures 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
TouchPad button board
Description
Spare part number
TouchPad button board (includes bracket and cable)
not spared
Before removing the TouchPad button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
28
).
5.
Remove the battery (see
Battery
on page
49
).
Remove the TouchPad button board:
1.
Disconnect the TouchPad board cable from the system board
(1)
.
2.
Remove the two Phillips PM2.0×3.0 screws
(2)
that secure the bracket, and then rotate the front of the
bracket up and lift it off the computer
(4)
.
3.
Remove the three Phillips PM2.0×2.0 broadhead screws
(5)
that secure the TouchPad button board to
the computer.
4.
Lift the foil and rubber gaskets from atop the left and right broadhead screw holes
(1)
.
Component replacement procedures
51