HP Pavilion 11-n038ca HP Pavilion 11 x360 PC Maintenance and Service Guide - Page 68
System board, Wireless antennas may include one or two antennas
View all HP Pavilion 11-n038ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
System board NOTE: The system board spare part kit includes replacement thermal material. Description Intel Pentium N3520 processor and the Windows 8.1 Standard operating system Intel Pentium N3520 processor and a non-Windows 8 operating system Intel Celeron N2820 processor and the Windows 8.1 Standard operating system Intel Celeron N2820 processor and a non-Windows 8 operating system Spare part number 755724-501 755724-001 755723-501 755723-001 Before removing the system board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Remove the battery (see Battery on page 49). NOTE: When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● WLAN module (see WLAN module on page 32) ● WWAN module (see WWAN module on page 34) ● Memory module (see Memory module on page 41) ● Heat sink (see Heat sink on page 46) ● Fan (see Fan on page 45) Remove the system board: 1. Disconnect the following cables from the system board: (1): Power connector cable (2): Wireless antennas (may include one or two antennas) (3): Keyboard cable (4): Webcam cable (5): Display cable (6): Power button board cable (7): Fan cable (8): Speaker cable (9): Touchpad board cable (10): Hard drive cable 60 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts