HP Point of Sale rp5000 Hardware Reference Guide (2nd Edition) - Page 39
Replace with the appropriate bezel by pushing the bezel into
View all HP Point of Sale rp5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Hardware Upgrades 6. Replace with the appropriate bezel by pushing the bezel into place. Ä CAUTION: For proper air circulation to cool internal components during operation, you must install a 3.5-inch bezel. The type of bezel you need will depend on the type of device you are installing. If you are installing a diskette drive, you must install a diskette drive bezel. If you are installing a hard drive, you must install a bezel blank as shown in the illustration below. If you are installing a 3.5-inch device other than a diskette drive or hard drive, you must install the 3.5-inch device bezel. Contact an authorized HP reseller or service provider to order the appropriate bezel when reconfiguring the computer. Replacing the 3.5-inch Bezel 7. Connect the power and data cables. 8. Replace the front bezel and computer access panel. ✎ If you have installed a hard drive that is not automatically recognized by the computer, see Appendix C, "Hard Drive Installation Guidelines." Hardware Reference Guide www.hp.com 2-29