HP Point of Sale rp5000 Hardware Reference Guide (2nd Edition) - Page 50
Type 1, Removing, the Computer Access Panel and Front Bezel
View all HP Point of Sale rp5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Battery Replacement Ä CAUTION: Static electricity can damage the electronic components of the computer or optional equipment. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. 1. Turn off the computer properly through the operating system, then turn off any external devices. Disconnect the power cord from the power outlet and disconnect any external devices. Remove the computer access panel (see Chapter 2, "Removing the Computer Access Panel and Front Bezel"). ✎ It may be necessary to remove an expansion card to gain access to the battery. 2. Locate the battery and battery holder on the system board. 3. Depending on the type of battery holder on the system board, complete the following instructions to replace the battery. Type 1 a. Lift the battery out of its holder. Removing a Coin Cell Battery (Type 1) b. Slide the replacement battery into position, positive side up. The battery holder automatically secures the battery in the proper position. D-2 www.hp.com Hardware Reference Guide