HP Presario CQ1 Upgrading and Servicing Guide - Page 14

Installing a New Hard Disk Drive NOTE: The replacement hard drive may not look exactly the same as the original drive due to different manufacturers or models. Hewlett-Packard always provides quality parts that meet or exceed your original computer specifications. 1 Insert the new hard disk drive into the cage. Make sure that the hard drive is inserted with the label facing up. 3 Replace and tighten the two screws on one side of the cage. 4 Replace and tighten the screws on the other side of the cage. 2 Align the hard disk drive screw holes with the screw holes on the hard drive cage. 5 Turn the hard drive cage over and reconnect the cable connector to the back of the hard disk drive. 12 603411-001 - Removing and Replacing a Hard Disk Drive