HP Presario CQ1 Upgrading and Servicing Guide - Page 27
and snap into place., Lift the stand so that the bottom screw hole is visible.
View all HP Presario CQ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
3 Insert and tighten the screws to secure the stand to the back cover. 5 Ensure the wire at the bottom of the computer clears the foot. 4 Before replacing the back cover, make sure the two computer feet are properly positioned in place. 6 Position the back cover over the back of the computer and snap into place. 7 Lift the stand so that the bottom screw hole is visible. 603411-001 - Removing and Replacing a Stand 25
603411-001
— Removing and Replacing a Stand
25
3
Insert and tighten the screws to secure the stand to the
back cover.
4
Before replacing the back cover, make sure the two
computer feet are properly positioned in place.
5
Ensure the wire at the bottom of the computer clears
the foot.
6
Position the back cover over the back of the computer
and snap into place.
7
Lift the stand so that the bottom screw hole is visible.