HP Presario CQ1 Upgrading and Servicing Guide - Page 8
CD/DVD cage., Before replacing the back cover, make sure the two
View all HP Presario CQ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4 Insert and tighten the screw at the sides of the CD/DVD cage. 7 Replace the CD/DVD drive cover screw. TIP: Do not over-tighten these screws. It is easy to strip the screw heads. 5 Connect the cable to the rear of the CD/DVD drive. 8 Before replacing the back cover, make sure the two computer feet are properly positioned in place. 6 Insert the CD/DVD drive cage, sliding it forward until the screw holes on the cage and computer align. 6 603411-001 - Removing and Replacing a CD/DVD Drive
6
603411-001
— Removing and Replacing a CD/DVD Drive
4
Insert and tighten the screw at the sides of the
CD/DVD cage.
5
Connect the cable to the rear of the CD/DVD drive.
6
Insert the CD/DVD drive cage, sliding it forward until
the screw holes on the cage and computer align.
7
Replace the CD/DVD drive cover screw.
8
Before replacing the back cover, make sure the two
computer feet are properly positioned in place.
TIP:
Do not over-tighten these screws. It is
easy to strip the screw heads.