HP Presario CQ1 Upgrading and Servicing Guide - Page 20
it into place., socket and then gently push down on the card to snap
View all HP Presario CQ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
11 Use a #2 Phillips screwdriver to remove the screw that secures the memory cover. 14 Holding the card by its edges, slide it all the way into the slot. TIP: The screw is very small and can be lost easily. Use caution when you remove it. Work over a surface where you can retrieve a screw if it falls. 12 Slide the memory cover in the direction indicated by the arrow engraved on the computer. Remove the cover. 15 Make sure the card is pressed all the way into the socket and then gently push down on the card to snap it into place. 16 Slide the memory cover into place. 13 Orient the new card so that the notch on the edge of the card faces forward. 18 603411-001 - Installing Memory
18
603411-001
— Installing Memory
11
Use a #2 Phillips screwdriver to remove the screw that
secures the memory cover.
12
Slide the memory cover in the direction indicated by
the arrow engraved on the computer. Remove the
cover.
13
Orient the new card so that the notch on the edge of
the card faces forward.
14
Holding the card by its edges, slide it all the way into
the slot.
15
Make sure the card is pressed all the way into the
socket and then gently push down on the card to snap
it into place.
16
Slide the memory cover into place.
TIP:
The screw is very small and can be lost
easily. Use caution when you remove it.
Work over a surface where you can retrieve
a screw if it falls.