HP Presario CQ1 Upgrading and Servicing Guide - Page 26
Installing a New Stand, on the back cover.
View all HP Presario CQ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
11 Turn the back cover over and use a #2 Phillips screwdriver to remove the two screws that secure the stand. Installing a New Stand 1 Insert the new stand into the opening on the back cover. TIP: The screws are very small and can be lost easily. Use caution when you remove them. Work over a surface where you can retrieve a screw if it falls. 12 Slide the stand out of the back cover. 13 Remove the stand. 2 Align the screw holes on the stand with the screw holes on the back cover. 24 603411-001 - Removing and Replacing a Stand
24
603411-001
— Removing and Replacing a Stand
11
Turn the back cover over and use a #2 Phillips
screwdriver to remove the two screws that secure the
stand.
12
Slide the stand out of the back cover.
13
Remove the stand.
Installing a New Stand
1
Insert the new stand into the opening on the back
cover.
2
Align the screw holes on the stand with the screw holes
on the back cover.
TIP:
The screws are very small and can be
lost easily. Use caution when you remove
them. Work over a surface where you can
retrieve a screw if it falls.