HP ProLiant DL380 G3 with MSA500 ProLiant DL380 Generation 3 Packaged Cluster - Page 56
Configuring Cluster Services, Smart Array Cluster Controller, Start, Programs, Administrative Tools
View all HP ProLiant DL380 G3 with MSA500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
System Setup and Configuration for Microsoft Windows 2000 Advanced Server 3. Select the Smart Array Cluster Controller to configure the shared storage hard drives. Refer to the HP Array Configuration Utility User Guide on the Documentation CD for detailed information. NOTE: Microsoft recommends creating a 500-MB quorum drive to store cluster information. The quorum drive may be a logical drive that is part of an array. 4. Select Start, Programs, Administrative Tools, Computer Management. Then select Disk Management to create volumes out of the logical drives after the shared storage system drives are configured. Be sure to write a disk signature, assign drive letters, and format the volumes as NT File System (NTFS). IMPORTANT: Do not upgrade the logical drives from Basic to Dynamic. Cluster Services for Microsoft Windows 2000 Advanced Server does not support dynamic disks. 5. Close Disk Management and shut down the first server. 6. Power on the second server. 7. Select Start, Programs, Administrative Tools, Computer Management. Then select Disk Management. Review the drive letters and change if necessary to be the same as the first server. 8. Shut down the second server. Configuring Cluster Services To configure the cluster services: 1. Power on the first server. 2. Install and configure the Microsoft Cluster Services (MSCS) component of Windows 2000 Advanced Server. NOTE: Refer to the Windows 2000 Advanced Server documentation for details on installing and configuring Cluster Services. 3. Install Service Pack 3 or later and reboot the server when prompted. HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide 3-5