HP ProLiant DL380 G3 with MSA500 ProLiant DL380 Generation 3 Packaged Cluster - Page 76
Creating Novell Storage Services Volumes and Pools, Device Disk Management, Media
View all HP ProLiant DL380 G3 with MSA500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
System Setup and Configuration for Novell NetWare 6 Creating Novell Storage Services Volumes and Pools To create NSS volumes and pools: 1. Log in to ConsoleOne from one of the nodes and authenticate to the appropriate tree. 2. Scroll down and highlight the cluster created earlier. 3. Select the Device Disk Management icon near the top of the screen. 4. Highlight a shared drive. (Be sure that it is not the drive containing DOS or SYS.) 5. Select the Media tab and click NSS logical volumes. 6. Select New and enter a new logical volume name. Click Next. 7. Highlight the first external shared drive on the Smart Array Cluster Storage system. 8. Select Allow volume quota to grow. Click Next. 9. Enter a Pool Name and click OK. 10. Assign a virtual IP address for the NSS volume. Click OK. 11. Select Finish. NOTE: When prompted to continue creating the partition, click Yes. 12. Repeat steps 6 through 11 for all shared drives. NOTE: At this point, all of the NSS Volumes that were created will be online in the cluster. Configuration is now complete. 6-6 HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide