HP ProLiant DL380 G3 with MSA500 ProLiant DL380 Generation 3 Packaged Cluster - Page 90
Installing Management Agents for Servers for Linux, Installation, Congratulations, Finish
View all HP ProLiant DL380 G3 with MSA500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
System Setup and Configuration for SuSE Linux Enterprise Server 7.1 For more information on the automatic configuration, refer to the HP ROM-Based Setup Utility User Guide located on the Documentation CD. 3. Insert the SLES 7 CD into the CD-ROM drive and reboot the server. 4. Install the SLES 7 operating system on the server internal storage. Select New Installation for the install type so that you can specify hard drive preparation. NOTE: Refer to your operating system documentation for additional installation information. For more information on installing SLES 7 on ProLiant servers, refer to www.hp.com/products/servers/linux. 5. When installation is complete, the Congratulations screen is displayed. You may configure any additional hardware at this time. Click Finish Installation and reboot the server. 6. Install the Linux Driver for the Smart Array 5i, 5300 Series for SuSE-SLES7, which is available at www.compaq.com/support/files/server/us/index.html. This Linux driver is also known as the CCISS driver. 7. (Optional) Install the Array Configuration Utility, which is available at www.compaq.com/support/files/server/us/index.html. This utility can be used for online configurations. 8. Power down the server. 9. To configure the second server, repeat steps 2 through 8. Installing Management Agents for Servers for Linux For instructions on installing and running Agents for Servers for Linux refer to the documentation located at www.compaq.com/support/files/server/us/WebDoc/550/Linux.pdf HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide 8-5