HP ProLiant DL380 G3 with MSA500 ProLiant DL380 Generation 3 Packaged Cluster - Page 83
Installing Management Agents for Servers for Linux, Configuring the Shared Storage, Maintenance
View all HP ProLiant DL380 G3 with MSA500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
System Setup and Configuration for Red Hat Linux 7.3 Professional Installing Management Agents for Servers for Linux For instructions on installing and running Agents for Servers for Linux, refer to the documentation located at www.compaq.com/support/files/server/us/WebDoc/550/Linux.pdf Configuring the Shared Storage To configure the shared storage: 1. Power on one server and boot from the SmartStart 6.1 (or later) CD. 2. After booting with the SmartStart CD, click the Maintenance tab, then select and run the Array Configuration Utility. 3. From the Array Configuration Utility Configuration screen, select the Smart Array Cluster Controller to configure the shared storage hard drives. Refer to the HP Array Configuration Utility User Guide on the documentation CD for detailed information. 4. Reboot the server and log in. 5. Format and mount the shared storage disks. NOTE: No action is required on the second server at this time. 7-6 HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide