HP ProLiant DL380 G3 with MSA500 ProLiant DL380 Generation 3 Packaged Cluster - Page 63
Validating the Cluster Configuration
View all HP ProLiant DL380 G3 with MSA500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
System Setup and Configuration for Microsoft NT Server 4.0, Enterprise Edition Validating the Cluster Configuration To validate the installation, perform the following steps from either cluster node: 1. Select Start, Programs, Administrative Tools, Cluster Administrator, and connect to the cluster. 2. Right-click one group. Select Move Group. 3. Verify the group fails over to the other node and all resources come online. 4. Right-click the same group. Select Move Group. 5. Verify that the group fails back to the original node and all resources come online. 6. Repeat steps 2 through 5 for each group. Configuration is now complete. IMPORTANT: If the packaged cluster is being transferred, return to "Setup in the Configuration Fixture" in Chapter 2 or refer to the packaged cluster hardware installation and configuration poster to complete the process. 4-6 HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide