HP StorageWorks 4000 Compaq StorageWorks Fibre Channel Troubleshooting Guide - Page 48
Compaq StorgeWorks Fibre Channel Troubleshooting Guide
View all HP StorageWorks 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4-8 Compaq StorgeWorks Fibre Channel Troubleshooting Guide C Is the recieve LED on? Yes Remove the server cable No connector from the GBIC at To check if light is the Storage Hub 7. coming from the cable connector, plug the cable into a good GBIC at the Fibre Storage Hub 7 and make sure the Bypass LED goes off. Never look into the connector to see if light is present. Is the transmit LED on? No Is the laser light coming from No the cable connector? Check the GBIC and the Storage Hub 7. Yes Yes Run the utility if the device is the Fibre Host Adapter. Replace the GBIC. C1 If the device is the Fibre Channel Array Controller, is the Heartbeat LED blinking? See Appendix A. Yes First replace the GBIC. If no change, replace the Fibre Channel Array Controller. No Replace the Fibre Channel Array Controller.