HP Surestore L10 Service and User Manual (Short- and Long-Wave) - Page 45
About the RS-232 Main Menu
View all HP Surestore L10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Table 1 Worksheet for Hub Configuration (cont'd) Parameter Parent Hub SNMP get community name SNMP set community name SNMP trap community name Child Hub (if any) About the RS-232 Main Menu When you set up an RS-232 connection and boot the hub, the hub management Main menu appears on the terminal screen. Fibre Channel Hub Model Number: Device Agent Version: Hub Controller Version: Agent Boot PROM Version: Status of Device Agent self-test: Status of Hub Controller self-test: HP3724A 02.14 03.06 01.04 passed passed 1. Reset hub and run self-test 2. Set Networking parameters 3. Management options 4. Hub information The model and version numbers displayed can be different from the examples shown in this manual. Fewer menu options are displayed in earlier versions of the hub firmware. To update the firmware, follow the instructions given in Updating the Hub Firmware on page 48. If the Main menu does not appear and the display shows the following message, press the Reset button on the front panel of the hub. pROBE+> The Main menu provides four options: 1. Reset hub and run self-test This option resets the hub and runs the diagnostic tests. When changes are made to the hub, they do not take effect until the hub is reset. RS-232 Interface Functions Overview 43