HP Tx1220us HP Pavilion tx1000 Entertainment PC - Maintenance and Service Guid - Page 48

Memory module, Remove the memory module compartment cover.

Get HP Tx1220us - Pavilion Entertainment - Turion 64 X2 2.2 GHz PDF manuals and user guides View all HP Tx1220us manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Memory module Description 1-DIMM, PC2-5300, 667 MHz, 1024-MB 1-DIMM, PC2-5300, 667 MHz, 512-MB Spare part number 441406-001 441405-001 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 36). Remove the memory module: 1. Position the computer with the front toward you. 2. Loosen the two Phillips PM2.0×5.0 screws (1) that secure the memory module compartment cover to the computer. 3. Lift the left side of the cover (2) and swing it to the right. 4. Remove the memory module compartment cover. NOTE: The memory module compartment cover is included in the Plastics Kit, spare part number 441138-001. 5. Spread the retaining tabs (1) on each side of the memory module socket to release the memory module. (The edge of the module opposite the socket rises away from the computer.) ENWW Component replacement procedures 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
Memory module
Description
Spare part number
1-DIMM, PC2-5300, 667 MHz, 1024-MB
441406-001
1-DIMM, PC2-5300, 667 MHz, 512-MB
441405-001
Before removing the memory module, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power cord.
4
.
Remove the battery (see
Battery
on page
36
).
Remove the memory module:
1
.
Position the computer with the front toward you.
2
.
Loosen the two Phillips PM2.0×5.0 screws
(1)
that secure the memory module compartment cover
to the computer.
3
.
Lift the left side of the cover
(2)
and swing it to the right.
4
.
Remove the memory module compartment cover.
NOTE:
The memory module compartment cover is included in the Plastics Kit, spare part
number 441138-001.
5
.
Spread the retaining tabs
(1)
on each side of the memory module socket to release the memory
module. (The edge of the module opposite the socket rises away from the computer.)
ENWW
Component replacement procedures
43