HP Tx1220us HP Pavilion tx1000 Entertainment PC - Maintenance and Service Guid - Page 64

Top cover, Remove the battery see

Get HP Tx1220us - Pavilion Entertainment - Turion 64 X2 2.2 GHz PDF manuals and user guides View all HP Tx1220us manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

32. Release the display QuickPlay board (2) as far as the display QuickPlay board cable will allow. 33. Disconnect the display QuickPlay board cable (3) from the display QuickPlay board. NOTE: The display QuickPlay board is available in using spare part number 441122-001. 34. Remove the display QuickPlay board from the display enclosure. Reverse this procedure to reassemble and install the display assembly. Top cover Description Spare part number Top cover (includes TouchPad and TouchPad cable, caps lock light board and cable, and 441134-001 top cover bumper pads) Before removing the top cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 36). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. WWAN module (see WWAN module on page 40) c. Optical drive (see Optical drive on page 42) d. Keyboard (see Keyboard on page 47) ENWW Component replacement procedures 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
32
.
Release the display QuickPlay board
(2)
as far as the display QuickPlay board cable will allow.
33
.
Disconnect the display QuickPlay board cable
(3)
from the display QuickPlay board.
NOTE:
The display QuickPlay board is available in using spare part number
441122-001.
34
.
Remove the display QuickPlay board from the display enclosure.
Reverse this procedure to reassemble and install the display assembly.
Top cover
Description
Spare part number
Top cover (includes TouchPad and TouchPad cable, caps lock light board and cable, and
top cover bumper pads)
441134-001
Before removing the top cover, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power cord.
4
.
Remove the battery (see
Battery
on page
36
).
5
.
Remove the following components:
a
.
Hard drive (see
Hard drive
on page
38
)
b
.
WWAN module (see
WWAN module
on page
40
)
c
.
Optical drive (see
Optical drive
on page
42
)
d
.
Keyboard (see
Keyboard
on page
47
)
ENWW
Component replacement procedures
59